Top 10 Things to Note on High Temperature Safety Production in Summer

 Key points for enterprise summer safety production management tips: High temperatures in summer are a period when safety accidents occur frequently and natural disasters are caused by high incidence of accidents.Judging from safety statistics, June to September each year is the peak period of accidents.Top 10 things to pay attention to when doing a good job in summer safety:

01Use electricity

    The weather is hot in summer, people wear thin clothes and sweaty skin, which increases the risk of electric shock.In addition, during this period, it is wet and rainy, and the insulation performance of electrical equipment has been reduced.This makes summer a prone season for electrical safety accidents.It is particularly important to ensure electrical safety precautions. Electricity must be in line with electricity safety. Turn off computers and other electrical equipment after get off work.

02Prevent heat and cool down

    The weather is hot in summer, so ventilation in the workplace should be strengthened to prevent heatstroke accidents.Provide good work and rest places, provide cool drinks well, and conduct health checks on high-temperature workers.It is necessary to implement medical first aid measures for patients with heatstroke and prepare necessary first aid medicines.

03Pressure vessel

    Gas welding and gas cutting are common operating items in the workplace.It is the usual practice of some construction units to place the gas cylinder directly at the construction site.In addition, some high-pressure storage tanks, such as liquefied balloon tanks, liquid ammonia storage tanks, etc., have relatively high temperatures in summer. The temperature rises under the scorching sun and expands in volume. In severe cases, explosions of gas cylinders, storage tanks, etc. will cause casualties and property losses.Once an explosion occurs, it will also cause a second accident (such as a fire), causing greater losses.It can be seen that the use and storage of pressure vessels in summer operations is very important. If necessary, the spray cooling system is turned on. It is strictly forbidden to over-temperature and over-pressure of the pressure vessels.

04Personal protection

    In order to protect the personal safety of employees during the production process, all production personnel must wear personal protective equipment.Hard hats, work clothes, gloves, seat belts for high-altitude work, etc. should be worn neatly at all times just in case.

05Equipment and materials

    Large-scale equipment and units should be managed and inspected, and safety management personnel should do a good job in supervision and inspection.All equipment, towers, etc. shall be lightning-proof and grounded according to the specifications;In case of strong winds above level 6, all construction personnel and high-altitude workers should stop construction;Pay attention to doing a good job in on-site drainage to ensure smooth drainage;All safety facilities on site should be strengthened and protective work should be done, especially for safety protection devices and facilities to be inspected regularly to ensure that they are in a good state to prevent accidents.

06Fire prevention

    Implement all fire prevention systems, fully equipped fire equipment, strictly control open flame operations, and strictly prohibit privately pulling and connecting wires. At the same time, storage and use management of flammable and explosive products should be strengthened.

07Special Operations

    Strengthen the management of special operations personnel, supervise and hold a certificate to work, eliminate the occurrence of illegal operations, and implement the responsibility for production safety and implement it to everyone.

08Bad weather

    Do a good job in preventing production safety and protection in severe weather such as strong winds, thunder, and heavy rainstorms.Relevant departments should pay attention to meteorological forecasts, timely grasp the trends of bad weather such as strong winds, heavy rains, and hot heat. They should make accident predictions in severe weather emergencies and formulate accident emergency plans, strengthen technical training, and employees should be proficient in handling power outages and other accidents, improve employees' ability to prevent accidents, and promptly and effectively prevent emergency safety work.

09Flood prevention

    Due to heavy rainfall in summer, all departments should clean the trenches and rain drains, keep them unobstructed, without blockage, oil pollution, and ensure that the drainage pipes are unobstructed.Ensure that in continuous heavy rain, the rainwater in the factory can be discharged out in time and there is no water accumulation in each device area.

10Anti-leakage, poisoning

    With the advent of high temperatures in summer, the volatility and diffusion of toxic gases such as hydrogen sulfide in the oil products is accelerated, and operators who come into contact with toxic gas positions are prone to toxic gas poisoning.To this end, we must strengthen the prevention of toxic gas poisoning for personnel in relevant work positions.